Metronome

Difficulty

Entertainment

Summary

We usually think of soldering irons, pliers and oscilloscopes when we think of electronic tools, and while this project may not be useful to the electronics enthusiast we think it's a good way of showing how Arduino based tools can be useful in other fields - in this case for musicians. The Duinotech Metronome has adjustable tempo between 20 and 240 bpm and can be set to accent anywhere between every beat and every eighth beat. It also gives a display of the classical name for that tempo.

Materials Required

1
1
1

Table of Contents

Connection Table
Downloads
Assembly
Programming
Use

Connection Table

The LCD Shield fits directly on top of the Arduino.

Buzzer	LCD Shield
S	A3
-	A5

Downloads

Source code

Assembly

Solder the buzzer onto A3, A4, A5 of the LCD shield. Mount the LCD Shield on top of the UNO.

Programming

Download the source code, extract into a new folder, open the .ino file in the Arduino IDE and press upload.

The sketch for this project uses a few of the libraries that are included with the IDE so there shouldn't be any extra libraries to be installed unless you have a very old version of the IDE. You should be able to load the sketch, select UNO board and its serial port, and upload straight away. The Metronome should start working straight away. If you don't get any sound try checking the connection between the Buzzer Module and LCD Shield. One of the features of the sketch is the use of the Timer interrupt to provide a precise interval between tones.

Use

Operation of the Metronome is simple. The buttons have the following functions:

Button	Function
Select	Save current setting to EEPROM
Left	Decrease tempo
Right	Increase tempo
Up	Increase count between accented beats
Down	Decrease count between accented beats
Reset	On reset the EEPROM settings are loaded so this can be used to restore settings

Future Improvements

Being able to customize a project is what we like about Arduino and this one is no different. If you don't like the names and tempi that are displayed they can be changed in the tempos[] and temponames[] arrays. The notes that are played as tones can also be changed in the accnote[] array.

Similar projects you may be interested in