This kit enables you to connect from a bilge pump to the outside of your boat. It consists of two basic components. The hull skin fitting (white) which requires you to drill a 25mm (1”) hole through your hull. It will accommodate hulls up to 40mm thick. Make sure you place the fitting well above the water line. As high as possible. This fitting has a barb-type receiver for the outlet hose which is 1.5m long x 19mm (3/4”) dia. It simply slides onto the skin fitting on one end and the pump outlet pipe on the other. Even though this kit is made by Johnson and is ideal for their products, it will work with any pump that has 19mm (3/4”) outlet. It is also supplied with two stainless steel hose clamps.
Note: An actual bilge pump is NOT included with this unit. Plumbing only.
