A standard 0-190 Ohm signal fuel gauge. Works with all kinds of fuel sensors and both petrol and diesel. Empty(0/4) to Full(4/4) display.
MGG605 Black - White needle over black background
MGG606 White - Red needle over white background
60mm overall bezel Dia.
2" (52mm) panel cut out
Anti-vibration, precision error <3°
IP67 ingress protection (Front Side)
IP65 ingress protection (Back Side)
Stainless steel bezel with flat glass
Background illumination (Red)
12/24V
Pre-terminated connecting plug supplied
Dropping resistors supplied for 24V panel
Simple calibration set-up with clear instructions supplied
Extra technical tips for electrically noisy installations
*Panel thickness 0.8mm-25mm (reverse mounting the plastic lock nut achieves this.)
*Requires 55mm clearnace behind mounting panel
