Raymarine iTC-5 Instrument Transducer Converter

The Road Tech Marine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG.

Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

ITC-5 KEY FEATURES
Extended SeaTalkNG systems can support multiple iTC-5 units.
SeaTalkNG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkNG backbone.
Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).
If you donftt have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers


POWER
Power consumption
Typical: 1.5 W

Operating voltage range
9 - 16 V dc

Nominal supply voltage
12 V dc

Current
< 150 mA peak operating current

LEN (NMEA 2000 Load Equivalency Number)
3

DATA CONNECTIONS
Connections
SeaTalkng backbone, 1 x SeaTalkng spur, 5 x transducer connections with spade terminals


ENVIRONMENTAL
Relative humidity
Max. 95%

Splash proof
IPx2

Storage temperature
-25° C to +70° C

Operating temperature
-15° C to +55° C

CONFORMANCE
Standards
Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2