Resistor & Capacitor Tester
Difficulty
Test & Tools
Summary
Here's another easy to build project similar to the LED tester, and using the same hardware. This project will try to work out whether it's connected to a resistor or capacitor and then show you the value (resistance or capacitance) of it. If it's a resistor, it'll also suggest the nearest resistor from the Jaycar range of ½W resistors. Of course, using off the shelf components, it's not a high accuracy device, but handy to have if you're sorting through your junk drawer and are having trouble with the colour codes. There's about ten solder joins that need to be made to complete this project.
Materials Required
1 | Duinotech UNO r3 Main Board | XC4410 |
1 | Duinotech Arduino Compatible Prototyping Shield | XC4482 |
1 | Duinotech Arduino Compatible 2 X 16 LCD Screen Display with Controller | XC4454 |
1 | 150 Ohm 0.5 Watt Metal Film Resistors - Pack of 8 | RR0552 |
1 | 1.2k Ohm 0.5 Watt Metal Film Resistors - Pack of 8 | RR0574 |
1 | 10k Ohm 0.5 Watt Metal Film Resistors - Pack of 8 | RR0596 |
1 | 150mm Plug to Plug Jumper Leads - 40 Piece | WC6024 |
Table of Contents
Similar projects you may be interested in