Wood Finish PLA Filament 250g 1.75mm

NOTE: This product has been replaced by TL4588. Click here for the replacement

A 250g roll of wood coloured filament to suit FDM 3D printers, including the TL4582 3D Pen Kit

PLA (Polylactic acid) is a biodegradable, environmentally friendly plastic that can produce a variety of finishes. It doesn't have the notable smell of hot plastic, compared to ABS during the printing process.

Can provide sharper detail compared to ABS, doesn't necessarily need a heat bed but benefits from cooling during the printing process.

Printing Settings
• Best Printing Temperature: 190-240°c (200°c recommended)
• Bed Temperature: 0-60°c (50°c recommended)
• Printing Speed: 30 - 90mm/s